Burner management.
Done right
the first time.
BMS service, fired equipment, and Wi-Fi monitoring for Permian operators. Built by techs who run their own software — and answer their own phone.
What we do.
BMS Service
Install, troubleshoot, and recertify burner management on every platform in the basin — modern controllers, legacy units, pneumatic-only. Same-day diagnosis on most lockouts.
ROS BMS
Our proprietary burner management system — designed, built, and deployed by ROS. Built-in 10.1" rugged touchscreen, telemetry outputs (analog + dry contacts) for SCADA integration, and local Wi-Fi UI — all standard. No portal, no monthly fee, no cell service required. 2-year warranty.
Fired Equipment
Heater treaters, line heaters, reboilers, glycol units, and the legacy pneumatic-only heater systems most shops won't touch. Parts on the truck. Emergency callouts.
Combustion
Burner sizing, flare ignition consultation, BMS audits, and combustion-system design. Sized right the first time — or call us in to fix what someone else designed.
Running a Platinum 600 BMS?
Platinum's site is all vapor recovery now — the 600's no longer on it. If you're running them, we'll get you a modern, field-serviceable replacement: built-in touchscreen, no monthly fees, a real 2-year warranty, built and supported here in the Permian.
We don't just service oilfield equipment.
We built the software that tracks it.
EndureOps is our in-house field service software for oilfield crews. Battle-tested daily on every callout we run. It's why your work order shows up clean, your photos come back captioned, and your ETA is real.
Three reasons operators
switch to ROS.
Owner-operated.
When you call, you get the guy whose name is on the truck — not a dispatcher.
We run our own software.
EndureOps means cleaner work orders, real ETAs, and reports the same day.
Permian-built crew.
Every tech lives in the basin. We know the pads and the access roads.
“Excellent service! Highly recommend them!”
Where we work.
Permian-based out of Midland, working both sides of the state line. Same-day across the core basin, scheduled routes for the edges.
Straight from the field.
Plain-English guides on the equipment we service — written by the crew that works on it, not a marketing department.
A bulged firetube we caught on a routine PM — and what it saved
We pulled this firetube during a routine PM. The unit was still running and still making temperature — and it was days from a burn-through. Here's what a bulged firetube means and how we fix it.
4 min read →How a burner management system works (flame proving, lockouts, and all)
A BMS isn't a thermostat. Its whole job is to light a burner safely, prove there's actually a flame, and shut everything down the second something's wrong.
5 min read →Flare vs. combustor vs. enclosed combustor: what's the difference?
They all burn off gas you can't sell or capture. The difference is how completely they burn it, how visible it is, and what the rules in your area will accept.
4 min read →Why your BMS keeps locking out: the usual suspects
A BMS that locks out is doing its job. A BMS that keeps locking out for no obvious reason is telling you something — usually one of about six things.
5 min read →Quick answers.
Do you only work in the Permian Basin?
+
Yes — Permian-built crew operating across West Texas (Ector, Midland, Andrews, Reeves, Ward, Crane, Howard, Loving, Winkler counties) and southeast New Mexico (Lea, Eddy). Out-of-basin work case-by-case by arrangement. Call (432) 227-4106.
What kind of equipment do you service?
+
Burner management systems on every major brand, heater treaters, line heaters, reboilers, glycol units, PSV/PRV testing, thief hatches, flares, enclosed combustors, and legacy pneumatic-only heater systems. We don't do compressor station overhauls — everything else fired-equipment, we do.
How fast can you get a tech to a pad?
+
Same-day within ~75 miles of Midland for most service requests. Next-day or scheduled within ~75–150 miles. Beyond that, by arrangement. Emergency callouts 24/7 — call (432) 227-4106 and we'll quote an ETA based on your site location.
Are you a manufacturer, a service company, or both?
+
Primarily a service company — we install, troubleshoot, and recertify every major BMS brand. We also build our own ROS BMS for operators who want a vendor-neutral controller: built-in 10.1" rugged touchscreen, built-in telemetry outputs (analog + dry contacts) for SCADA integration, local Wi-Fi UI — all standard, no portal, no monthly cellular fee, real 2-year warranty.
How do I request service or a quote?
+
Fastest path is to call (432) 227-4106 — we answer our own phone. You can also use the contact form on our site and we respond same-day during business hours (6 AM – 5 PM, Monday–Saturday).